PPC.04: Interface P1 to pulse and P1 to USB

The PPC.04 module, or the "P1 port to Pulse" converter is a stand-alone module that either reads meter readings from the P1 port and converts them to consumption pulses, or transmits meter readings serially to a USB port. A home automation system or data logger can use this module, import, export, gas consumption and switch high-low tariff via pulses to read in. With the USB output, you can then create your own application for PC or Raspberry Pi. The serial protocol is described in the datasheet or you can also use our Windows demo application for configuration and/or readout via PC.

• The meter supports both the Dutch digital meter (DSMR 2.x, DSMR 4.x, DSMR 5.x) and the Belgian digital meter (DSMR 5.x).
• By default, the module is set to the Belgian DSMR 5.x meter but via the windows configuration software and a USB connection to the PC, this setting can be changed.
• Power for the PPC.04 module is supplied by the digital meter via the supplied 'RJ11 6P/6C cross cable' . Only the Dutch DSMR 2.x measure needs to be powered externally via a 5V/100mA USB power supply
• In addition to the 4 pulse OUT outputs, the PPC.04 module also has 2 pulse IN inputsfor counting consumption pulses which can then be read out serially via USB.

Comments:

1. Pre-activate the Belgian digital meters to work: via this link If the digital meter screen shows a triangle above "GP" (GP is in laser marking below the screen) then ports P1 and S1 are active.
2. The PPC.04 is not compatible with the P1 port of Landis+Gyr's digital meter type E350
3. The PPC.04 module is succeeded by the MoCo module

This product includes:

• 1x 2-Wire P1 to pulse/USB module PPC.04
• 1x RJ11 6P/6C 'cross' cable 2 meters
• 1x USB cable ( 5V/100mA)

Instruction manual:

• Quickstart Datasheet: QSA32 EN PPC.04

Software:

Download the Windows application for configuring and reading the PPC.04 module via USB here.

• • PPC04-MOCO-SetupV4.5_Win10_x64

  Note: this software is only needed to adjust the default settings ( digital meter protocol, pulse divider), or to update the PPC firmware, or to take and print a sample of the data string from the digital meter, or to visualize values from the digital meter and from the two pulse counter inputs.

Comments:

• Pre-activate the Belgian digital meters to work: via this link If the digital meter screen shows a triangle above "GP" (GP is in laser marking below the screen) then ports P1 and S1 are active.

Dimensions:

• Packaging: carton 10cmx5cmx8cm, 75gr
• DIN Rail : 2 modules
• SN 42Cxxxxx
• EAN 5430000860512

Out of stock