ELAN: LAN web server, connects, among other things, with the p1 port of the digital meter and switches to production, peak consumption or rate

ELAN is an autonomous energy monitor that switches heating or appliances by injection, peak consumption, energy rate and clock. After connection to LAN, consumption data from P1, Modbus meters, pulse counters are available for smart control of 2 solid state relays and WiFi smart-plugs. No software, app or cloud services needed, just surf to local IP address of ELAN to adjust configuration or logic or to monitor live effect.

Features:

• Real-Time consumption from the digital meter
• Measuring partial consumption
  • Direct consumers via Modbus Energy meters
  • Reading consumption via pulse counters
  • Household appliances measured via WiFi smart plugs
  • Remote web servers, smart plugs, air quality via IoT
• Smart switching adjustable for injection, peak consumption, weekly clocks, tariff,...
  • 2 Solid state relays for control Smartgrid heat pump/boiler/accumulation or direct consumers
  • WiFi plugs control household appliances
• Preconfigured: just set LAN IP address via the server scanner tool
• Platform independent: works via web browser on any device
• Autonomous: Local data storage: no app, software or cloud services.
• Real-Time: every 5 sec. (quarter) power update
• Graphs: Resolution 5 min/7days, 1day/12 months, 1month/2 years
• Data export to Excel and via HTTP upload
• Link over IoT with other web servers or with the html app (option MQTT token required)

Comments:

1. Pre-activate the Belgian digital meters to work: via this link If the digital meter screen shows a triangle above "GP1" (GP1 is in laser marking below the screen) then ports P1 and S1 are active.
2. ELAN is powered through the P1 port, or through an optional 5VDC power supply if no P1 is present.
3. To convert both solid-state to power relays you need a 12 Vdc power supply (HDR-15-12) and 2 power relays (PEM-01-012). You can find these on our website.
4. If no digital meter is present, you can connect your own Modbus meters to record (total) consumption, among other things.
5. After each new installation, it is important to upgrade ELAN to the latest firmware ( See FAQ, online tutorial, manual or Quickstart).
6. ONLY use conductors up to 0.5mm² with FIXED core in the ELAN connectors.
7. Network settings can be adjusted via the setup web page or via the 2-WIRE/Windows IP server scanner

This product includes:

• 1x ELAN smart energy switch
• 1x RJ11 6P/6C 'cross' cable of 2 meters

Instruction manual:

• Datasheet: QSA32 EN ELAN
• Comprehensive manual:
• Leaflet: ELAN EN

Dimensions:

• Packaging: box 15x15x10cm, 150gr
• EAN 5430000860574

   

ELAN: the smart energy manager via LAN quantity

Order