Energy monitor
on Web Server
Our product range
Energy meters, pulse counters, thermostats, C02 meters, ... all autonomously operating Modbus modules that are connected to the server ...
Product categories
- All products
- LoWi en ReMI(10)
- MiLo(8)
- MEMo(6)
- Energymeter(10)
- Current Transformers CT(11)
- Accessories(16)
- HVAC(6)
- Soft&Service(10)
- New(11)
-
CS.400: current sensor with a pulse output for the energy measuring of devices with constant consumption. -
De Zenner EDC-S is een reed contact sensor voor het meten van verbruikspulsen op een Zenner watermeter. -
The PPC.04 module reads meter readings from the P1 port and converts them to consumption pulses or forwards them to a USB port. -
The Itron Cyble sensor V2 is a reed contact sensor for measuring consumption pulses on an Itron water meter. -
The DR-15-15 MeanWell power supply 15 Volt DC power supply is used for the WS.500 (supplied as standard) or for the RG.016 in MiLo system (optional). -
The DR-15-15 MeanWell power supply 15 Volt DC power supply is used for the WS.500 (supplied as standard) or for the RG.016 in MiLo system (optional).
-
NTC sensor for coupling onto the EC.441, PC.080, RG.016, BC.002 module -
With this relay module 1x 16A/230 NO/NC you can convert the low power solid state outputs to a power output. -
With this relay module 2x 8A/230 NO/NC you can convert the low power solid state outputs to a power output. -
The IN-Z65 is a reed contact sensor for measuring consumption pulses on an Elster gas meter. -
The PR6 K1: 1 is a reed contact sensor for measuring consumption pulses on an Elster water meter type V200. -
The S02-Elster is a cylindrical reed contact sensor for the measurement of water pulses -
The ANT.868 is a directional antenna (RF868MHz) on magnetic base with 100cm wire for mounting outside the fuse box -
The set P1 allows to connect your Milo server or your RF gateway to read consumption from the digital meter (B+NL) -
The VS.230 is a voltage sensor that detects if a device with a constant consumption is switched on or off. -
The ANT.WiFi is a directional antenna (RF2.4Ghz) on a magnetic base with 100cm wire for mounting outside the fuse box
