DCE.230: Energy Meter for direct current measurement up to 1000A, Modbus+pulse

The DCE.230 is an advanced DC power monitor with indirect current measurement via 75mV shunt resistance and with a Modbus RTU connection. Configuration of the meter is done via the touch buttons on the front panel and LCD display. The bi-directional measurement measures consumption DC power supplies up to a maximum of 2000A and at a maximum of 1000Volt. Reading out the consumption values can be done via the display or on the linked web server. The module sits in a 2-module wide DIN rail housing and has 1 adjustable pulse output in addition to an RS485 connection. Modbus parameters are set via the LCD display.

Characteristics:

• Power supply module 9..40VDC
• 4 connections for coupling a shunt resistor
• Shunt resistor adjustable 100A/200A/400A/...up to 2000A at 75mV
• Measuring range voltage max 1000Volt DC
• Compact housing, 4 module=70 mm wide
• Lockable cover
• Measured values: P, U, I, kWh+, kWh- (2 directions)
• 1x Pulse output adjustable and Modbus RTU output
• Meter accuracy: Cat II
• Shunt accuracy: 0.5%

This product includes:

• 1x energy meter type DCE.230
• Shunt should be ordered separately.

Instruction manual:

• Manual English: DCE.230 V1.7 A3c
• Modbus registers: DCE.230 protocol modbus V1.7

Dimensions:

• Packaging: 10cm x 4.5cm x 7.5cm, 195gr
• DIN-Rail: = 2 DIN rail modules

DCE.230: Energy Meter for DC measurement up to 1000A, Modbus+pulse quantity

Order