ReMI: WiFi web server, connects, among other things, with the p1 port of the digital meter and switches to production, peak consumption or rate

435,60 (Incl BTW)

ReMi is an autonomous energy monitor that controls heating or appliances via injection, peak consumption, energy rate and clock. After interfacing with WiFi, consumption data from the P1, Modbus meters and the Internet are available locally for smart control of 4 relays and WiFi smart plugs. No software, app or cloud services required, just surf to local IP address of ReMi to adjust configuration or logic or to monitor live effect. Functionalities:
  • Real-Time consumption from the digital meter
  • Measuring partial consumption
    • Direct consumers via Modbus Energy meters
    • Reading consumption via pulse counters
    • Household appliances measured via WiFi smart plugs
    • Remote web servers, smart plugs, air quality via IoT
  • Smart switching adjustable for injection, peak consumption, weekly clocks, tariff,...
    • Smartgrid control heat pump/boiler/accumulation
    • Solid state relay control direct consumers
    • WiFi plugs control household appliances
  • Pre-configured: just wifi password and IP address
  • Platform independent: works via web browser on any device
  • Autonomous: Local data storage: no app, software or cloud services.
  • Real-Time: every 5 sec. (quarter) power update
  • Graphs: Resolution 5 min/7days, 1day/12 months, 1month/2 years
  • Data export to Excel and via HTTP upload
  • Link over IoT
  1. Activate Belgian digital meters in advance to work: via this link If the digital meter screen shows a triangle above "GP" (GP is in laser marking below the screen) then ports P1 and S1 are active.
  2. Additional power supply 12VDC: Some (somewhat older) digital meters do not provide enough or no current to power ReMI (approx 200mA), or if you want to switch in addition to monitors then it is better to power the module externally with a 12VDC power supply type HDR-15-12 on this site. The same power supply can then also serve if you want to convert both solid-state to power relays via the PEM-01-012. Even if no digital meter is present, you can connect your own Modbus meters to record the (total) consumption, among other things, and even then an external power supply 12 VDC is required.
  3. ReMI is not compatible with the P1 port of Landis+Gyr's digital meter type E350
  4. After each new installation, it is important to upgrade ReMI to the latest firmware ( See FAQ, online tutorial, manual or Quickstart)
This product includes:
  • 1x ReMI smart energy switch
  • 1x RJ11 6P/6C 'cross' cable of 2 meters
  • 1x 12VDC DIN-Rail power supply
Instruction manual:
Charge Book:
  • Packaging: box 15x15x10cm, 150gr
  • SN: RMxxxxxxx
  • EAN 5430000860574

Deze website maakt gebruik van cookies. Als u verder surft geeft u 2-wire toelating om deze cookies te gebruiken. Opgelet, het blokkeren van bepaalde cookies verhindert het correct functioneren van deze website.


Would you like to stay informed of all further developments, you can subscribe to our newsletter.