LeON is an extension to LoWi, Wifi display of the digital meter. LoWi transmits the current energy tariff to LeON via WiFi. LeON, which is visible in the living space, shows this rate status with its RGB LED, where: RED: daily rate Flashing RED: peak consumption with adjustable threshold power...

Every LoWi, MiLo or MEMo2 web server with internet connection can update itself and its linked modules, which gives a lot of extra possibilities: PDF of the configuration: Printing a web page via Chrome, Safari, Edge, ... was until recently not easy Export data: Retroactively, export data from the web...

full_width] Fluvius event ‘Slimme toepassingen voor de digitale meter’ [one_half] [/one_half]   Fluvius organiseert op 10 maart in “Hotel van der Valk” te Mechelen, en op 19 maart in de “Ghelamco Arena” te Gent, een partner-event voor de elektro installateurs en dat  rond het thema “Slimme toepassingen voor  de digitale...

[full_width] [/full_width] [full_width] LoWi connects directly to the P1 port of the digital meter and reads the meter readings import, export and gas every 5 minutes. The digital meter readings are then automatically processed into graphs and tables, and so you get via the web browser on every smartphone, tablet,...

[full_width] 'ENERGIES + construction' building fair [/full_width] [full_width] Eloya, professional federation for electricians, is present at "Energies + construction 2019". At their exhibition stand in Wex *, they present their organization and 7 Eloya partners. 2-Wire is also there, and that with a product presentation on "smart applications for the...

On September 11 and 18, Fluvius is organizing a partner event for installers on the T2 campus in Genk, focusing on smart applications for the digital meter. 2-Wire is also present at this event. In addition to the MiLo home energy monitor, we also display the MEMo2 data logger web...

For home automation installers: The new P1-to-pulse module converts the meter readings of the digital meter (import, export, gas, tariff status) to 4 pulse outputs. The impulses are then read into the home automation installation so that it can switch based on energy consumption or tariff status or can create...

MEMo2, the newest 2-WIRE data logger web server, is equipped with an RF transmitter receiver, all 2-WIRE energy meters are now either wired (Modbus) or wireless (LoRa) read and monitored. The firmware of the web server is then expanded with a logic user interface; consumers can switch smartly based on...

recently at 2-Wire is the RF gateway module which connects to different meters: connect the P1 connector to the Dutch and Flemish digital meters the 4 analog / binary inputs count consuming pulses or measure temperatures the Modbus connection connects kWh meters and calorimeters All gateway measured values are then...