This relay module 1x 16A/230 NO/NC can be used to convert ReMI outputs to power outputs.

NTC sensor for coupling onto the EC.441, PC.080, RG.016, BC.002  module

The HDR-15-12 MeanWell power supply 12 Volt DC power supply is used for the ReMI whether or not in conjunction with the PEM-01/012.

With the P1 hub you can connect up to 3 P1 applications to the P1 port of the Belgian and Dutch digital meter

With the P1 splitter, you can connect up to 3 P1 applications to the P1 port of the Belgian and Dutch digital meter

With this relay module 1x 16A/230 NO/NC you can convert the low power solid state outputs to a power output.

Adapter cable from DSMR 4 and USB to LoWi

THEo measures the local air temperature and humidity, and shows when energy becomes free and green .

LeON shows you exactly when energy becomes both and free and green

With the set P1 port extender, one can connect 2-wire modules to the smart meter up to a distance of 100 meters via an ordinary UTP cable.

The set P1 port Wireless allows you to wirelessly connect 2-wire modules to the smart meter up to a distance of about 100 meters (if no obstacles are present).

Do you have a mono-phase installation and do you want to monitor a number of circuits in your fuse box without cabling and whether or not you also want to connect the digital meter, you can do that with this kit. You now always have insight into these energy consumptions via a tablet or smartphone.

This  kit connects your MiLo server with the 2-Wire Modbus energy meters (kWh) in your control cabinet.

The set P1 allows to connect your Milo server or your RF gateway to read consumption from the digital meter (B+NL)

The Energy Counter measures electrical consumption in the fuse box, registers consumption pulses and transmits this wirelessly to the MiLo or MEMo web server.

The BC.002 RF (LoRa/FSK) battery-operated pulse counter counts or time-measuring pulses with incremental counter reading. The module communicates directly with MiLo and MEMo2.